The simplicity of a screw-in system is now combined with the reliability, performance and value of Smart Parts Max-Flo Regulators. Max-Flo regs lead the industry in delivering the high flow performance needed by today's paintball markers while including innovative features to make them safer than any other before.
Smart Parts 68ci SIS Tank features:
Preset Convenience - The Max-Flo SIS is preset to deliver approximately 800 psi compressed air or nitrogen to a marker, with no need to spend time at the tech table tweaking and adjusting – the Max-Flo SIS is ready to go.
Stainless Steel ASA Threads - Strong durable threads that resist damage.
Increased Diameter Fluted Valve Pin - While most screw-in air systems use brass or aluminum valve pins, these metals eventually dent, bend or chip under repeated use. The Max-Flo SIS' pin is of a larger diameter and made of stainless steel. In addition to strength, the larger diameter and unique fluted design allows for an increased flow volume from the regulator.
Anti-Launch Neck - Screw-in style air system design must ensure that a regulator cannot be accidentally removed from a pressurized cylinder while the system is being unscrewed from a marker. Competing brands solve this by the use of high torque levels and thread-locking adhesives. These strategies can create dangerous situations. The Consumer Products Safety Commission has reported on the accidental removal of a CO2 tank in which thread-locking compound blocked the valve's safety vent. Hydrotesters have reported situations of competing brand screw-in regulator necks becoming weakened or broken during removal for hydrotesting. The Smart Parts anti-launch neck design provides extended secondary neck threads deep inside the compressed air cylinder. Quadruple-redundant safety vents ensure that if the bottle is accidentally unscrewed under pressure, it will be fully vented long before the regulator can be removed. Because no thread locking compounds are used, and torque values are lower, the Max-Flo SIS is the only screw-in compressed air regulator that can be readily removed for TSA air travel compliance without violating its manufacturer's operation guidelines. Smart Parts recommends removal and installation by a factory certified technician.
Low-Profile Fill Nipple - Keeping with the compact size of the Max-Flo SIS, Smart Parts has employed a compact, low-profile fill nipple. By using an allen-wrench on internal hex flats for installation, the fill nipple avoids the need for external wrench flats, and the height they add has been eliminated. The Max-Flo SIS fill nipple uses industry standard 1/8-inch NPT threads, allowing standard fill nipples to be used as a replacement, if needed.
High-pressure and Low-pressure Burst Disk Protection - Unified burst disk assemblies protect the regulator and cylinder from over-filling, and protect the player's marker from high-pressure regulator leaks.
Stainless Steel Filter - A stainless steel filter keeps foreign debris out of your marker.
Urethane Seals - Long-life urethane seals outlast the cheap buna rubber used by competing brands.
Two Tanks to Fit Your Budget - Available in 5 year hydro carbon-fiber or 3 year re-hydroed fiberglass.
